3-Function Wall-Mounted Mixer vs. Traditional Shower Set: Which Is Easier to Install?

Fixing up a bathroom seems easy at first. But then you look at all the small bits, like mixers, valves, and water spots. Lots of home folks and builders now ask the same thing: Do I pick a new 3-function wall-mounted shower mixer, or keep the old shower set I know? Let’s check out how these two work different. We’ll focus on setup. And since we’re talking real help, we’ll see how ITAVA’s 3-Function Single Lever Shower Combination (Dante Series, TF-DAN3601) fits in.

A Closer Look at the 3-Function Wall-Mounted Mixer

A 3-function shower mixer puts three water spots in one easy control. These are often a top shower, a hand shower, and a tub spot. You don’t need to twist many knobs. One lever and a switch do it all. What makes this stand out is how it saves room. The wall-mounted mixer installation keeps your bathroom neat and simple. Fewer stains out means less dirt or hard water spots. Homeowners like that after a few months. In the Dante Series (TF-DAN3601), ITAVA’s team made water paths better. Switching from a hand shower to an op shower happens quickly. No drips or waits.

Traditional Shower Sets: Familiar, but More Work

If you know the old shower set from growing up, you get it. Separate handles, pipes you see, and a mixer box that might need more wall holes. It works fine. But setup can be a pain. Some folks keep it because it’s what they know. Or their pipes don’t fit a new wall one easy. But when you think about the steps—like lining up hot and cold pipes, sealing spots, setting the wall hole right—you see how much time it takes. Looks matter too. Old sets show more parts. That can break the smooth wall in new bathrooms. For today’s rooms, that counts a lot.

Installation Comparison: Step by Step

Let’s look at what setup means for each.

The Real Challenge: Wall Preparation

Sure, there’s a snag. Wall-mounted mixer installation needs the right wall behind the tile. If your wall is too thin or pipes don’t match hidden parts, you might tweak things. In old houses, moving pipes could be a big job. But once set, fixes get simpler over the years. Think of it like this: an old shower set is like a desktop computer—all out, easy to reach, but messy. A wall-mounted mixer is like a notebook: small, built-in, made for easy long use.

Why Many Professionals Choose 3-Function Mixers Now

Bathroom builders and planners now pick 3-function shower mixers for jobs where looks and quick setup count. Here’s why:

• Fewer out parts → less rust, easy clean.
• Simple pipes → fewer setup mistakes.
• Room saver → great for small or new bathrooms.
• Neat look → fits today’s styles easily.

ITAVA’s Dante Series adds these with cut brass parts, strong ceramic insides, and a hot water guard—bits that help in daily use and over time.

Which Is Easier to Install? Let’s Be Honest

So, who wins? If you look just at setup trouble, the 3-function wall-mounted mixer is simpler—if your wall works for it. It’s neater, quicker, and made for today’s pipes. The old shower set works, but needs more hand tweaks and doesn’t give the clean look most home folks want now. But here’s the real bit: the “easiest” is what fits your bathroom. For some, that’s still the old set for small changes.

Practical Tips for a Smooth Wall-Mounted Mixer Installation

If you plan a wall-mounted mixer installation, prep helps a ton.

• Check the wall thickness: Make sure the hole fits the mixer body tightly.
• Use a bubble level: It’s basic, but a small tilt can make leaks or wonky handle moves.
• Seal spots with silicone tape, not just glue.
• Run water lines clean before the end setup—small junk can hurt the ceramic inside.
• Don’t twist fittings too hard. Brass is tough but can break.

Pro plumbers say half the setup woes start with “one more turn.”

Real-World Example: ITAVA’s Dante Series TF-DAN3601

The Dante Series 3-Function Single Lever Shower Combination shows how new mixers make setup easy. Made for homes and hotels, the TF-DAN3601 has:

• Small hidden body for easy wall put-up.
• Three water spots (top shower, hand shower, spout).
• One lever for hot-cold and strong flow tweak.
• Long-lasting brass build.
• Shiny chrome coat that matches most bathroom looks.

If you’re thinking bathroom changes or need help picking, ITAVA’s team gives pro talk and aid on their contact page.

Conclusion

In the end, choosing between the three traditional wall-mounted faucet and shower sets to choose depends on your preferences. If you pay attention to convenient installation, the appearance of the modern and comfortable for a long time, so the wall-mounted faucet of ITAVA is usually a more sensible choice. The design of these faucets not only focuses on aesthetics but also on ease of installation, reliable performance and low maintenance costs. The traditional system is still effective, but once you experience the differences in comfort and maintenance, it’s very difficult for you to come back.

FAQ

Q1: What are the differences between a 3-function shower mixer and a traditional shower set?
The three-function faucet integrates the top spray, handheld showerhead and water outlet functions in one controller, while the valves in traditional sets are independent of each other, making installation more complicated and prone to errors.

Q2: Can I install a wall-mounted mixer myself?
If plumbing is straightforward, yes. But if pipe adjustments are needed, a professional plumber is recommended.

Q3: How long does installation take?
About an hour for a qualified installer. The integrated design speeds up setup compared to traditional systems.

Q4: Are wall-mounted mixers suitable for older bathrooms?
Yes, though minor plumbing adjustments may be needed to fit the wall cavity and pipe layout.

Q5: How do I maintain a 3-function shower mixer?
Wipe the surface, check fittings annually, and clean the aerator to maintain smooth water flow.